Hamid Manouchehri
Comminution '18, April 16-19, Cape Town, South Africa
ABSTRACT
As an energy intensive industry, mining consumes about 6-7% of total world’s energy to produce raw materials for subsequent industries. Grinding, however, is the most energy intensive process in mining which is respo...
25-Jul-2019
F.P. van der Meer
Canadian Mineral Processors Conference, 23-25 January 2018, Ottawa, Canada
ABSTRACT
HPGRs operate in a wide array of applications in mining and minerals. These range from relatively coarse crushing of copper and gold ores at one end of the spectrum to the processing of fine iron...
28-Jun-2019
W. Conger, J.F. DuPont, R.E. McIvor, T.P. WeldumW. Conger, J.F. DuPont, R.E. McIvor, T.P. Weldum
Mining Engineering, November 2018, pp. 28-37
The objective of the study conducted by the authors is to determine what media size(s) addition will maximize any given plant ball mill’s grinding efficienc...
16-Jan-2019
E Baawuah, C Kelsey, J R Kelly, J Addai-Mensah and W Skinner
14thAusIMM Mill Operators’ Conference, 29-31 August 2018, Brisbane, Australia
ABSTRACT
Comminution continues to be the most capital-intensive unit operation in mineral processing. The fundamental purpose of comminution is to libera...
20-Dec-2018
K MATSON, S TYRRELL AND B JACKSON
14thAusIMM Mill Operators’ Conference, 29-31 August 2018, Brisbane, Australia
Australia
ABSTRACT
Northern Star Resources Limited Jundee Gold Mine in Western Australia operates a comminution circuit that
consists of a primary crusher, 3.85 MW semi-autogenous gri...
27-Sep-2018
C G KELSEY AND J R KELLY (1)
PRESENTED AT IMPC 2016: XXVIII INTERNATIONAL MINERAL PROCESSING CONGRESS PROCEEDINGS, SEPTEMBER 11-15, QUEBEC CITY, CANADA
ABSTRACT
Dry crushing trials at pilot scale have shown that the IMPTEC Super-fine Crusher has the capacity to generate ultra-fine products from h...
18-Jul-2017
The Effect of Choke Feeding a Gyratory Crusher on Throughput and Product Size
J -F Dupont (1), J McMullen (1) and D Rose (2)
49th Annual Canadian Minerals Processors Conference, Ottawa, Canada, 2017
ABSTRACT
The Detour Lake mine is located 200 km northeast of Timmins, Ontario, Canada...
26-May-2017
The transition from semi-autogenous to autogenous milling at Waihi Gold
C Haines and D Bertoldi
AusIMM Mill Operators Conference 2016
ABSTRACT
The Waihi Gold Mine (WGM) operated by OceanaGold New Zealand Limited is a wholly owned subsidiary of the OceanaGold Corporation of Australi...
26-Apr-2017
Grinding circuit practices at Newmont
A Giblett and S Hart
AusIMM Mill Operators Conference 2016
ABSTRACT
In 2015 operations under the ownership and/or management of all Newmont Mining Corporation subsidiaries (Newmont) produced 5.7 Moz of gold and 619 Mlb of copper from mining opera...
26-Apr-2017
Abstract
In the dry grinding industry the demand for very fine particle size distributions is increasing rapidly. At the same time a growing awareness for an economical management of our planet's resources has raised the demand for energy efficient processes.
Roller mills in general and specific...
12-Feb-2016
Abstract
Declining ore grade, leading to increased material transport and plant throughout requirements, is one of the major challenges in the current mining environment. This is accompanied by rising energy and labour costs, decreasing plant productivity and the requirement for highest plant avail...
20-Jan-2016
ABSTRACT
Mining consumes approximately 7% of the world’s energy from which almost half goes for comminution. Since the crushers are more energy efficient than mills, it is logic to push down-sizing in crushing stage(s) as far as possible. That has been Sandvik’s strategy in supplying crushers, in...
25-Nov-2015
ABSTRACT
The inherent conservatism of the mining industry is well understood, but the current hurdles encountered with financing new projects have complicated instances when new technologies such as high pressure grinding rolls (HPGR) are considered, especially if it translates into higher capita...
25-Nov-2015
XXII International Mineral Processing Congress, Cape Town, South Africa
The introduction and subsequent ascendancy of autogenous and semi-autogenous milling for comminution circuits has undoubtedly lead to many economic advantages. From a process viewpoint, however, at least one downside has been...
23-Aug-2003