Abstract
A computational model for use with DEM (Discrete Element Method) is proposed for the five mechanisms applying to particle comminution in AG, SAG and coarse feed ball mills. Chipping and rounding are mechanisms that lead to preferential mass loss from corners and edges of particles and whic...
18-Apr-2016
Abstract
Stirred mill technology dates back to 1928 where the idea to use "an agitator and spherical grinding media" was presented. In the context of the mining industry, interest in stirred milling technologies has grown over the last 20 years where the typical observation reported in the literatu...
20-Mar-2016
ABSTRACT
Mill filling is an important operational parameter in a SAG mill circuit and by its control and optimisation it can produce significant improvements in production capacity and energy efficiency. However, it is industry practice to report mill load as the total output given by load cells, o...
20-Feb-2016
Abstract
The breakage characteristics of a two-component ore in a confined bed was studied in this work in order to predict the breakage behaviour of a multi-component ore from the properties of individual components. Bed compression tests with each single component and blended components at differ...
19-Feb-2016
Abstract
A specific energy-based size reduction model for batch grinding ball mills was reported in a previous paper (Shi and Xie, 2015). A discharge function modified from the Whiten classification efficiency equation has been incorporated in the size reduction model to extend its applications fro...
19-Feb-2016
Abstract
The slurry level in AG/SAG and ball mills has an influence on their power draw, which in some instances can be profound. This is particularly the case with so-called slurry pooling in AG/SAG mills which can result in significant lowering of power draw. From a predictive viewpoint there are...
19-Feb-2016
Abstract
In the dry grinding industry the demand for very fine particle size distributions is increasing rapidly. At the same time a growing awareness for an economical management of our planet's resources has raised the demand for energy efficient processes.
Roller mills in general and specific...
12-Feb-2016
Abstract
Liners in grinding mills not only protect the mill shell from the aggressive environment inside the mill, but they also play a significant role in the efficiency of grinding. The design of mill liners dictates the charge trajectory and hence the grinding efficiency. The common approach in...
12-Feb-2016
Abstract
This paper compares the performance associated with both direct and reverse ball mill closed circuit configurations. Survey campaigns were carried out in both Samarco Mineração industrial plants, i.e., Concentrator I and Concentrator II. The former is equipped with a reverse-configured b...
12-Feb-2016
Abstract
The latest state of the art on Discrete Element Method (DEM) and the increased computational power are capable of incorporating and resolving complex physics in comminution devices such as tumbling mills. A full 3D simulation providing a comprehensive prediction of bulk particle dynamics i...
12-Jan-2016
ENHANCED OPEN GEAR LUBRICANTS PROVIDE TANGIBLE BENEFITS FOR HEAVY INDUSTRY – THEY ARE THE ‘CLEAR’ CHOICE FOR IMPROVED OPEN GEAR RELIABILITY
ABSTRACT
The maintenance of large open gear systems at mines, power or cement plants present a significant challenge due to the heavy loads and harsh enviro...
01-Dec-2015
ABSTRACT
PT Newmont Nusa Tenggara – Batu Hijau site mine to mill program has been systematically improved and resulting in Geo-Metallurgical detailed ore characteristics is successfully being used for short and long term business planning and mill throughput predictions. Actual plant operating an...
30-Nov-2015
Abstract
More complex ore bodies with lowering grades increase the challenges of maintaining high throughput, energy efficiency and required particle size for optimal downstream processing in grinding circuits. Continuous and often rapidly changing characteristics of the mill feed requires consta...
26-Nov-2015
Abstract
The effect of liner wear on SAG mill performance has gained much attention in recent years. It is commonly observed that the three key performance criteria of SAG milling; throughput, power and product size all improve as the liner wears.
The increase in throughput is generally ascrib...
26-Nov-2015
ABSTRACT
Mining consumes approximately 7% of the world’s energy from which almost half goes for comminution. Since the crushers are more energy efficient than mills, it is logic to push down-sizing in crushing stage(s) as far as possible. That has been Sandvik’s strategy in supplying crushers, in...
25-Nov-2015
ABSTRACT
Blasting plays a major role in the fragmentation of rock in open pit mining, which is then crushed and processed before the final product is obtained. Tailoring the blasting method to suit rock mass characteristics can lead to significant improvements downstream. Mine to Mill is a method...
25-Nov-2015
ABSTRACT
The inherent conservatism of the mining industry is well understood, but the current hurdles encountered with financing new projects have complicated instances when new technologies such as high pressure grinding rolls (HPGR) are considered, especially if it translates into higher capita...
25-Nov-2015
ABSTRACT
At the regrind or secondary grinding stages of base metal ores, the concern about energy efficiency is usually extremely important. In general, the specific energy consumption at this stage is higher than during the primary grinding stages. In addition, a tendency of finer grinding has bee...
21-Jul-2015
International Journal of Mineral Processing 2004
Despite reservations of a number of researchers concerning the applicability of Bond's equation for relating specific energy to the size reduction of rocks, his approach has become an industry standard.
Data from a large number of pilot and full-s...
29-Mar-2005
XXII International Mineral Processing Congress, Cape Town, South Africa
The introduction and subsequent ascendancy of autogenous and semi-autogenous milling for comminution circuits has undoubtedly lead to many economic advantages. From a process viewpoint, however, at least one downside has been...
23-Aug-2003
Comminution 1998
This paper presents observations made during the conduct and analysis of eleven separate autogenous and semi-autogenous pilot plant trials. These trials were conducted using different ores for various projects over the past five years. The ores tested include relatively competent...
22-Nov-1998